70-411問題集、70-411勉強資料、70-411勉強材料、70-411参考書、70-411受験体験記

企業は非常に多いため、MCSA: Windows Server 2012認定資格はIT プロフェッショナルにとって重要な資格と言えます。
必要な70-411試験すべてに合格すると、受験者はMCSA: Windows Server 2012認定を取得したものとして認定されます。
70-411を体験してマイクロソフトのテスト形式を知っておくことで、試験で使用されるツールの使い方に戸惑うことなく、問題を解くことに集中することができます。
MCSA: Windows Server 2012認定70-411試験合格を目指すのであれば、Passexamの70-411問題集を解くだけでもできます。
70-411試験の合格点は700点で、弊社のほかのお客様がMCSA: Windows Server 2012認定70-411勉強資料を使用してから、高得点を取得することができます。
弊社のMCSA: Windows Server 2012認定70-411勉強材料は知識ゼロの初心者でも勉強せずに受験しても合格できる。
弊社のMCSA: Windows Server 2012認定70-411参考書が暗記してた問題の応用問題は役に立ちます。

70-411受験体験記には、下記のとおりです

1.普段からPassexamで問題を解くときにも心得ておくと良いかも。

2.試験問題と似たような問題が多かった為、相当助かりました。

3.
【試験コード】

【合格点】
700点

【取得点】
796点

【受験回数】
1回目

【学習期間】
3週間

【問題数】
46

【出題形式 】
単一選択,複数選択,リスト選択(単一),リスト選択(複数),ドラッグ&ドロップ,並べ替え,クリックマップ(画面上をクリックする)

【試験時間】
120分

【参考にしたテキスト/Webサイト】
赤本を読む
Passexamの問題を解く

【学習方法】
基本的に問題をたくさん解く必要があると思ったので赤本を購入し繰り返し解きました。
Passexamの問題集を2/3くらい。

【試験の感想】
最初は試験を受けたが、合格する事ができなかった。
その後、再試験等をしながら、3週間間赤本やPassexamの問題を参考に勉強に取り組んだ。

信頼性の高いMCSA: Windows Server 2012認定70-411問題集としてはしっかり勉強すれば合格できます。
最新のMCSA: Windows Server 2012認定70-411試験のテキストで90%ぐらいの正解率になります。
弊社のMCSA: Windows Server 2012認定70-411勉強資料は受験者によって実践を通して得られた結果です。

70-411試験概要:
試験番号:70-411
試験名称:Windows Server 2012 の管理
配信開始: 2012 年 9 月 17 日
言語: 英語、中国語 (簡体字)、フランス語、ドイツ語、日本語、ポルトガル語 (ブラジル)
対象者:IT プロフェッショナル
テクノロジ: Windows Server 2012 R2
対応資格: MCP、MCSA、MCSE
受験料:21103円

MCSA: Windows Server 2012認定70-411試験は、エンタープライズ環境で Windows Server 2012 インフラストラクチャを管理するために必要なスキルと知識をテストする 3 部構成の試験の第 2 部です。

MCSA: Windows Server 2012認定70-411試験では、ユーザーとグループの管理、ネットワーク アクセス、データ セキュリティなど、Windows Server 2012 インフラストラクチャの保守に必要なタスクの管理について、受験者の能力を検証します。

70-411認定試験がカバーする出題分野ならびに各分野の試験問題数に占める割合を以下に示します。

サーバーの展開、管理、保守 (15-20%)
ファイルと印刷サービスの構成 (15-20%)
ネットワーク サービスとアクセスの構成 (15-20%)
ネットワーク ポリシー サーバー (NPS) インフラストラクチャの構成 (10-15%)
Active Directory の構成と管理 (10-15%)
グループ ポリシーの構成と管理 (15-20%)

弊社のMCSA: Windows Server 2012認定70-411試験資料を選択した場合は、知識を統合するために時間とエネルギーを大幅に節約することができます。
弊社のMCSA: Windows Server 2012認定70-411受験対策を繰り返し解き90%以上正解できます。
もし、MCSA: Windows Server 2012認定70-411試験材料を使用してから、不合格の場合、弊社で購入したお金を返金します。
初心者はPassexamだけでは合格が心配だという人や高得点を狙う人は、弊社のMCSA: Windows Server 2012認定70-411問題集の併用を選択してください。
最全面的なMCSA: Windows Server 2012認定70-411問題と解答を提供するだけでまく、一年間の無料更新サービスも提供いたします。

1.Your network contains an Active Directory domain named contoso.com. The domain contains a server
named Server1 that runs Windows Server 2012 R2.
Server1 has the following role services installed:
– DirectAccess and VPN (RRAS)
– Network Policy Server
Remote users have client computers that run either Windows XP, Windows 7, or Windows 8.
You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN
connections to Server1.
What should you configure on Server1?
A. A condition of a Network Policy Server (NPS) network policy
B. A constraint of a Network Policy Server (NPS) network policy
C. a condition of a Network Policy Server (NPS) connection request policy
D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
Answer: A
Explanation:
If you want to configure the Operating System condition, click Operating System, and then click Add. In
Operating System Properties, click Add, and then specify the operating system settings that are required
to match the policy.
The Operating System condition specifies the operating system (operating system version or service pack
number), role (client or server), and architecture (x86, x64, or ia64) required for the computer
configuration to match the policy.

2.You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server role
and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1.
You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP clients.
Which criteria should you specify when you create the DHCP policy?
A. The client identifier
B. The user class
C. The vendor class
D. The relay agent information
Answer: B

3.Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed. An administrator creates a RADIUS client template named Template1.
You create a RADIUS client named Client1 by using Template 1.
You need to modify the shared secret for Client1.
What should you do first?
A. Configure the Advanced settings of Template1.
B. Set the Shared secret setting of Template1 to Manual.
C. Clear Enable this RADIUS client for Client1.
D. Clear Select an existing template for Client1.
Answer: D

4.Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1 that has the Network Policy Server server role and the Remote Access server role installed. The domain contains a server named Server2 that is configured as a RADIUS server. Server1 provides VPN access to external users. You need to ensure that all of the VPN connections to Server1 are logged to the RADIUS server on Server2.
What should you run?
A. Add-RemoteAccessRadius -ServerNameServer1 -AccountingOnOffMsg Enabled -SharedSecret “Secret” -Purpose Accounting
B. Set-RemoteAccessAccounting -AccountingOnOffMsg Enabled -AccountingOnOffMsg Enabled
C. Add-RemoteAccessRadius -ServerName Server2 -AccountingOnOffMsg Enabled -SharedSecret “Secret” -Purpose Accounting
D. Set-RemoteAccessAccounting -EnableAccountingType Inbox -AccountingOnOffMsg Enabled
Answer: C

5.Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers, and Server4. Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1. You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive connection requests if both Server2 and Server3 are unavailable.
How should you configure Group1?
A. Change the Weight of Server4 to 10.
B. Change the Weight of Server2 and Server3 to 10.
C. Change the Priority of Server2 and Server3 to 10.
D. Change the Priority of Server4 to 10.
Answer: D

6.Your network contains an Active Directory domain named adatum.com. A network administrator creates a Group Policy central store. After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates. You need to ensure that the Administrative Templates appear in new GPOs.
What should you do?
A. Add your user account to the Group Policy Creator Owners group.
B. Configure all domain controllers as global catalog servers.
C. Copy files from %Windir%\Policydefinitions to the central store.
D. Modify the Delegation settings of the new GPOs.
Answer: C

7.Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 500 client computers that run Windows 8 Enterprise. You implement a Group Policy central store. You have an application named App1. App1 requires that a custom registry setting be deployed to all of the computers.
You need to deploy the custom registry setting. The solution must minimize administrator effort.
What should you configure in a Group Policy object (GPO)?
A. The Software Installation settings
B. The Administrative Templates
C. An application control policy
D. The Group Policy preferences
Answer: D

8.Your network contains two Active Directory forests named contoso.com and dev.contoso.com. The contoso.com forest contains a domain controller named DC1. The dev.contoso.com forest contains a domain controller named DC2. Each domain contains an organizational unit (OU) named OU1.
Dev.contoso.com has a Group Policy object (GPO) named GPO1. GPO1 contains 200 settings, including several settings that have network paths. GPO1 is linked to OU1.
You need to copy GPO1 from dev.contoso.com to contoso.com.
What should you do first on DC2?
A. From the Group Policy Management console, right-click GPO1 and select Copy.
B. Run the mtedit.exe command and specify the /Domaintcontoso.com /DC: DC 1 parameter.
C. Run the Save-NetGpocmdlet.
D. Run the Backup-Gpocmdlet.
Answer: A

9.Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. Client computers run either Windows 7 or Windows 8. All of the client computers have an application named App1 installed. The domain contains a Group Policy object (GPO) named GPO1 that is applied to all of the client computers. You need to add a system variable named App1Data to all of the client computers.
Which Group Policy preference should you configure?
A. Environment
B. Ini Files
C. Data Sources
D. Services
Answer: A

10.Your network contains an Active Directory domain named contoso.com. All user accounts reside in an organizational unit (OU) named OU1. You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user. You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop. You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again.
What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: B

 

Leave a Comment

Your email address will not be published. Required fields are marked *