70-742問題集、70-742受験体験記、70-742試験資料、70-742参考書、70-742受験対策

70-742試験の配信開始時間は2016年11月3日です。
70-742試験では、Windows Server 2016 の ID 機能に焦点を当てています。
70-742を受験したら、実務経験がそれなりにある方は、PassexamのMCSA: Windows Server 2016認定70-742問題集の使用だけで合格出来ると思います。
弊社のMCSA: Windows Server 2016認定70-742参考書を暗記するだけで高得点で合格できます。
短期集中で勉強すれば、MCSA: Windows Server 2016認定70-742受験対策で1週間で十分だと思います。
弊社のMCSA: Windows Server 2016認定70-742試験資料を何回も解いていれば、十分試験に合格できると思います。
弊社のMCSA: Windows Server 2016認定70-742試験材料を勉強しとけば、Passできます。
弊社のMCSA: Windows Server 2016認定70-742勉強資料を一度ちゃんと学習しておけば合格レベルに到達すると思います。

70-742受験体験記には、下記のとおりです

1.Passexamで出題されている問題や類似するものが数多く出ていました。

2.Passexam問題集だけでもちゃんと勉強すれば合格は可能だと思います

3.Passexamの模擬で平均90%以上になってから受験しました。

70-742試験概要:

試験番号:70-742
試験名称:Identity with Windows Server 2016
言語: 英語
対象者:IT プロフェッショナル
テクノロジ: Windows Server 2016
対応資格: MCSA
合格点:700点
受験料:21103円

70-742受験対象者:

MCSA: Windows Server 2016認定70-742試験は、Nano Server 以外の環境に対応するグループ ポリシーの実装に加えて、Active Directory ドメイン サービス (AD DS) のインストールと構成を対象とします。
MCSA: Windows Server 2016認定70-742試験はActive Directory 証明書サービス (AD CS)、Active Directory フェデレーション サービス (AD FS)、Web アプリケーション プロキシ実装のような機能も対象とします。

70-742試験がカバーする出題分野ならびに各分野の試験問題数に占める割合を以下に示します。

Active Directory ドメイン サービス (AD CS) のインストールと構成 (20 – 25%)
AD DS の管理と保守 (15 – 20%)
グループ ポリシーの作成と管理 (25 – 30%)
Active Directory 証明書サービス (AD CS) の実装 (10 – 15%)
ID フェデレーションの実装とソリューションへのアクセス (15 – 20%)

弊社のMCSA: Windows Server 2016認定70-742勉強材料を使用すると、正解率は必ず合格を超えてます。
弊社のMCSA: Windows Server 2016認定70-742試験資料を勉強したら、試験に合格するために、一年間の無料更新サービスを提供します。
MCSA: Windows Server 2016認定70-742試験内容を身につけるというより、完全に70-742試験に合格することだけを目的とした勉強法になります。
もし、MCSA: Windows Server 2016認定70-742勉強資料を購入し、試験を受けましたが落ちて場合、アカウントに返金いたします。
MCSA: Windows Server 2016認定70-742問題を解答できるレベルにすれば合格できます。

1.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Rights Management Services (AD RMS) deployment.
Your company establishes a partnership with another company named Fabrikam, Inc. The network of Fabrikam contains an Active Directory forest named fabrikam.com and an AD RMS deployment.
You need to ensure that the users in contoso.com can access rights protected documents sent by the users in fabrikam.com.
Solution: From AD RMS in fabrikam.com, you configure contoso.com as a trusted publisher domain.
Does this meet the goal?
A. Yes
B. No
Answer: B

2.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Rights Management Services (AD RMS) deployment.
Your company establishes a partnership with another company named Fabrikam, Inc. The network of Fabrikam contains an Active Directory forest named fabrikam.com and an AD RMS deployment.
You need to ensure that the users in contoso.com can access rights protected documents sent by the users in fabrikam.com.
Solution: From AD RMS in contoso.com, you configure fabrikam.com as a trusted publisher domain.
Does this meet the goal?
A. Yes
B. No
Answer: A

3.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Rights Management Services (AD RMS) deployment.
Your company establishes a partnership with another company named Fabrikam, Inc. The network of Fabrikam contains an Active Directory forest named fabrikam.com and an AD RMS deployment.
You need to ensure that the users in contoso.com can access rights protected documents sent by the users in fabrikam.com.
Solution: From AD RMS in contoso.com, you configure fabrikam.com as a trusted user domain.
Does this meet the goal?
A. Yes
B. No
Answer: B

4.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration.
PS C:\> (Get-ADForest).ForestMode
Windows2008R2Forest
PS C:\> (Get-ADDomain).DomainMode
Windows2008R2Domain
PS C:\>
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You run adprep.exe from the Windows Server 2016 installation media.
Does this meet the goal?
A. Yes
B. No
Answer: A

5.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration.
PS C:\> (Get-ADForest).ForestMode
Windows2008R2Forest
PS C:\> (Get-ADDomain).DomainMode
Windows2008R2Domain
PS C:\>
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You upgrade a domain controller to Windows Server 2016.
Does this meet the goal?
A. Yes
B. No
Answer: B

6.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration.
PS C:\> (Get-ADForest).ForestMode
Windows2008R2Forest
PS C:\> (Get-ADDomain).DomainMode
Windows2008R2Domain
PS C:\>
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You raise the domain functional level to Windows Server 2012 R2.
Does this meet the goal?
A. Yes
B. No
Answer: B

7.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. The computer account for Server1 is in organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1 and link GPO1 to OU1.
You need to add a domain user named User1 to the local Administrators group on Server1.
Solution: From a domain controller, you run the Set-AdComputer cmdlet.
Does this meet the goal?
A. Yes
B. No
Answer: B

8.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. The computer account for Server1 is in organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1 and link GPO1 to OU1.
You need to add a domain user named User1 to the local Administrators group on Server1.
Solution: From the Computer Configuration node of GPO1, you configure the Local Users and Groups preference.
Does this meet the goal?
A. Yes
B. No
Answer: A

9.Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. The computer account for Server1 is in organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1 and link GPO1 to OU1.
You need to add a domain user named User1 to the local Administrators group on Server1.
Solution: From the Computer Configuration node of GPO1, you configure the Account Policies settings.
Does this meet the goal?
A. Yes
B. No
Answer: B

10.Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1.
You recently restored a backup of the Active Directory database from Server1 to an alternate Location.
The restore operation does not interrupt the Active Directory services on Server1.
You need to make the Active Directory data in the backup accessible by using Lightweight Directory Access Protocol (LDAP).
Which tool should you use?
A. Dsadd quota
B. Dsmod
C. Active Directory Administrative Center
D. Dsacls
E. Dsamain
F. Active Directory Users and Computers
G. Ntdsutil
H. Group Policy Management Console
Answer: E

 

Leave a Comment

Your email address will not be published. Required fields are marked *