70-743問題集、70-743受験体験記、70-743勉強資料、70-743学習材料、70-743試験のテキスト

どのように迅速かつ簡単の70-743試験に合格することができますか?
たくさんの70-743の勉強者はPassexamのMCSA: Windows Server 2016資格70-743問題集を使います。
最新のMCSA: Windows Server 2016資格70-743試験のテキストでの学習においても正確な暗記を心がける必要があると思います。
弊社のMCSA: Windows Server 2016資格70-743問題集を使用すると、70-743試験に初挑戦で正答率90%になります。
最新のMCSA: Windows Server 2016資格70-743学習材料を使用すると、1回で受ければ、受験料も高いだけに気持ち的には楽に受けられます。
真実の70-743試験と同じ、弊社のMCSA: Windows Server 2016資格70-743勉強資料から9割ぐらいに出題されます。

70-743受験体験記には、下記のとおりです

1.Passexamを何度も解いていると、自然に答えを覚えてしまって、解答を読んでもわからないので答えを暗記しているから解けてしまう。

2.Passexamを繰り返し勉強すれば実際の試験にも対応できると思います。

3.Passexamと同じ程度のレベルの試験内容でした。

70-743試験概要:

試験番号:70-743
試験名称:Upgrading Your Skills to MCSA: Windows Server 2016
配信開始: 2016 年 7 月 22 日
言語: 英語
対象者:IT プロフェッショナル
テクノロジ: Windows Server 2016
対応資格: MCSA
受験料:21103円

70-743受験対象者:

MCSA: Windows Server 2016資格70-743試験は、Windows Server 2016 コア インフラストラクチャ サービスの実装に必要なスキルと知識を確認したい IT プロフェッショナルを対象にしています。

MCSA: Windows Server 2016資格70-743試験の受験者は、MCSA: Windows Server 2008 または MCSA: Windows Server 2012 R2 認定資格を既に取得しています。
MCSA: Windows Server 2016資格70-743試験は、Windows Server 2016 で利用可能なインストール、記憶域、コンピューティング、ネットワーク、ID の主要な側面を対象とします。

70-743試験がカバーする出題分野ならびに各分野の試験問題数に占める割合を以下に示します:

ホスト環境とコンピューティング環境への Windows Server のインストール
記憶域ソリューションの実装
Hyper-V の実装
Windows コンテナーの実装
高可用性の実装
ドメイン ネーム システム (DNS) の実装
IP アドレス管理 (IPAM) の実装
ネットワーク接続およびリモート アクセス ソリューションの実装
高度なネットワーク インフラストラクチャの実装
Active Directory ドメイン サービス (AD CS) のインストールと構成
ID フェデレーションの実装とソリューションへのアクセス

MCSA: Windows Server 2016資格70-743試験に出題される問題のおおまかな傾向を知るためにはとてもよいと思います。
弊社のMCSA: Windows Server 2016資格70-743勉強資料だけでは、試験の合格可能です。
弊社のMCSA: Windows Server 2016資格70-743参考書は学習には役立ちますが、90%以上を得点できるようになれば、受験して良いと思います。
弊社のMCSA: Windows Server 2016資格70-743問題集を読破し、問題集を繰り返し解くことで理解できます。
MCSA: Windows Server 2016資格70-743無料サンプルを暗記しただけで、部分の問題と答えを習得できます。

1.You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016.
You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.
Which component must you install for the planned deployment?
A. the Routing role service
B. the Canary Network Diagnostics feature
C. the Network Controller server role
D. the Data Center Bridging feature
Answer: C

2.You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the Single Root I/O Virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors.
Which Windows PowerShell command should you run on the host of VM1?
A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterSriov
D. Set-NetAdapterQoS
Answer: A

3.You have a Nano Server named Nano1.
You deploy several containers to Nano1 that use an image named Image1.
You need to deploy a new container to Nano1 that uses Image1.
What should you run?
A. the Install-WindowsFeature cmdlet
B. the docker run command
C. the docker load command
D. the Install-NanoServerPackage cmdlet
Answer: B

4.You have a server named Server1 that runs Windows Server 2016.
You plan to deploy Internet Information Services (IIS) in a Windows container.
You need to prepare Server1 for the planned deployment.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Install the Container feature.
B. Install Docker.
C. Install the Base Container Images.
D. Install the Web Server role.
E. Install the Hyper-V server role.
Answer: A,B,C

5.You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon.
On VM1, you have a container network that uses transparent mode.
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP.
What should you do?
A. On VM1, run docker network connect.
B. On Server1, run docker network connect.
C. On VM1, run Get-VMNetworkAdapter ¨CVMName VM1 | Set-VMNetworkAdapter ¨CMacAddressSpoofing On.
D. On Server1, run Get-VMNetworkAdapter ¨CVMName VM1 | Set-VMNetworkAdapter ¨C MacAddressSpoofing On.
Answer: D

6.You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?
A. Edit the configuration.json file.
B. Run the Set-ServiceWindows PowerShell cmdlet.
C. Edit the daemon.json file.
D. Modify the routing table on Server1.
Answer: C

7.You have a failover cluster named Cluster1.
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.
You need to configure monitoring on VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.
Which tool should you use?
A. Resource Monitor
B. Failover Cluster Manager
C. Server Manager
D. Hyper-V Manager
Answer: B

8.Your network contains an Active Directory domain. The domain contains two Hyper-V hosts.
You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos.
What should you do first?
A. From Server Manager, install the Host Guardian Service server role on a domain controller.
B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
D. From Server Manager, install the Host Guardian Service server role on both servers.
Answer: C

 

Leave a Comment

Your email address will not be published. Required fields are marked *